Friend Barboskin from the animated series "Barboskins"
Description author: Khasanova Natalia https://vk.com/id87467802
- This description is author's development.
- The publication of a description on any resources can be carried out by providing
document. Copying the description text and publishing is undesirable.
- When publishing works related to this description, please indicate the author of the description.
I would be very grateful for observing the above three points 
Materials:
- Yarn for toys beige, brown, pink, black, yellow, blue, green, white
colors. I used Vita Brilliant beige, blue and green (45% wool, 55% acrylic, 380
m / 100 g), Trinity Dream yellow, pink, brown and black (70% wool, 30%
bamboo, 180 m / 50 g).
- Yarn for eyes in white, black, green colors. I used Kirov iris.
- Crochet hooks to match your yarn.
- Thick cardboard for shoe insoles. Or any other dense material.
- Wire, in the event that you will make a toy on a frame. It took me 80 centimeters.
When using yarn with the indicated meter, the height of the toy is about 20 cm.
Abbreviations used:
- sc - single crochet;
- kill - decrease;
- pr - increase;
- KA - amigurumi ring;
- ss - connecting post;
- ssn - a column with 1 crochet;
- psn - half double crochet;
- ps - offset loop (sbn, necessary for knitting offset);
- VP - air loop.
The toy is knitted in a spiral (except for ears, bangs and specks on the eye). When using a marker
while knitting, it is not necessary to monitor its position. It is only needed as
designation of the beginning of the row.
Head
We knit with beige yarn
1 6 sbn in KA 6
2 6 ex 12
3 (1 sbn, pr) * 6 18
4 (2 sbn, pr) * 6 24
5 (3 sbn, pr) * 6 30
6 (4 sbn, pr) * 6 36
7 (5 sbn, pr) * 6 42
8 (6 sbn, pr) * 6 48
9-16 48 sc (8 rows) 48
17 17 sbn, 2 kill, 6 sbn, 2 kill, 17 sbn
We put a marker in place of the decrease. There will be eyes.
44
18-20 44 sbn (3 rows) 44
21 20 sc, 4 pr, 20 sc
In this row, in place of the increments, there will be
top of the spout
48
22 8 sbn, pr, (3 sbn, pr) * 2, 14 sbn, pr, (3 sbn, pr) * 2, 8 sbn 54
23 8 sbn, pr, (4 sbn, pr) * 2, 16 sbn, pr, (4 sbn, pr) * 2, 8 sbn 60
24-25 60 sbn (2 rows) 60
26 13 sc, dec, 4 sc, dec, 6 sc, dec, 2 sc, dec, 6 sc, dec, 4 sc, dec, 13 sc 54
27 12 sc, dec, 4 sc, dec, 5 sc, 2 dec, 5 sc, dec, 4 sc, dec, 12 sc 48
28 (6 PRS, UB) * 6 42
29 42 42
30 (5 sbn, ub) * 6 36
31 (4 PRS, UB) * 6 30
32 (3 sbn, ub) * 6 24
33 (4 PRS, UB) * 4 20
34-35 20 PRS (2 rows) 20
36 20 sbn 20
We make the required number of ps (I got 3) so that the beginning of the row is shifted to the middle
back of the head. You may end up with no need for offset loops, or
will have to dissolve a couple of columns.
For a smoother transition of the color of the offset loop, it is better to make ss, not sb.
Stuff your head with filler.
We start to knit the torso
37 change to black thread 20 sbn 20
38 20 ss, 2 ss 20
39 Change to yellow thread (4 sbn, pr) * 4 24
40 (1 sbn, pr) * 12 36
41 (5 sbn, pr) * 6 42
42-57 42 sc (16 rows) 42
58 42 sc for front half loops 42
59 42 sc, ss, cut the thread, hide 42
We knit panties
60 We knit with a blue thread for the back half-loops 58 row 42 sbn 42
61-65 42 PRS (5 rows) 42
Now fold the knitting in half so that the face area is in front.
The beginning of the next row should be in the middle of knitting. For this we do the necessary
the number of offset loops, or we dissolve several columns (I needed 3 ps).
We insert the wire frame. We take a piece of wire, fold it in half and give
shape as pictured. If necessary, wrap the wire with adhesive tape or
molar tape.
The length of the wire is taken taking into account the length of the toy + a certain amount on the feet. I have
the length of the wire was approximately 45 cm.
We fill the carcass.
Next, we will knit the legs.
Do not forget to stuff the carcass as you knit.
We do not break the thread. We count back 21 loops. Insert the hook into the 21st loop.
66 21 sbn 21
67 (5 sbn, ub) * 3 18
68-75 18 sbn (8 rows) 18
76 We knit for the front half-loops (2 sbn, pr) * 6 24
77 (3 sbn, pr) * 6 30
78 30 sbn, cut the thread, hide 30
To knit the second leg, repeat from rows 66 to 78.
After the pants are tied, close the hole between the legs with a thread with
with a needle.
Boots 2 pcs.
We start with the sole, knit with white yarn.
1 We collect 10 VP, then we knit in a circle starting from
the second from the loop hook.
8 sc, 3 sc in 1, 7 sc, 2 sc in 1
twenty
2 pr, 7 sc, 3 pr, 7 sc, 2 pr 26
3 1 sbn, pr, 7 sbn, (1 sbn, pr) * 3, 7 sbn, (1sbn, pr) * 2
Cut out the cardboard insoles under your sole.
Insert it when it is convenient for you. I am this
did when the shoe was completely tied.
32
4 For the rear half loops 8 sbn, 3 psn, 9 ssn, 3 psn, 9 sbn 32
5 Change the thread to green. 7 sbn, 4 psn, 2 ub from ssn, 1 ssn, 2 ub from ssn, 4 psn, 8 sbn 28
6 28 sc 28
7 9 sbn, 4 kill, 11 sbn 24
8 5 sbn, (1 sbn, ub) * 4, 7 sbn 20
9 8 sbn, 2 kill, 8 sbn 18
10 18 sbn, cut the thread, leave the tail for sewing, fill with filler 18
Now it is necessary

attach the shoes to the body with a needle and left
the tip of the thread on the shoe.
First you need to twist the wire into the shape of the insole.
It is more convenient to insert shoes and sew one at a time.
Sew on, grabbing the boot loops and the back half loops in the 76th row of the legs.
The handles are available in two versions. The first option is knitted in two parts and is suitable for
frame toys, the second option is knitted in a single piece and the handles can be attached to the body
thread fastening. The second option is provided by Lena
First option
We begin to knit with beige yarn from the fingers. It is necessary
tie 4 fingers.
1 5 sbn in KA 5
2-3 5 sc (2 rows) 5
After the last finger has been tied, we do not cut the thread.
We knit in a circle, tying fingers to each other and
forming a handle. We connect three fingers, then we knit
fourth. For the right and left hand, rows 6 and 7 are knitted by
differently.
4 2 sbn of the first finger, 2 sbn of the second finger, 4 sbn of the third finger, 2 sbn of the second
finger 2 sbn of the first finger.
12
5 12 sbn 12
For right handle
6 3 sbn, 2 sbn tying a finger from the inside and a handle together, 7 sbn 12
7 3 sbn, 3 sbn fingers, 7 sbn 13
8 11 sc, dec 12
For left handle
6 * 7 sbn, 2 sbn tying a finger from the inside and a handle together, 3 sbn 12
7 * 7 sbn, 3 sbn fingers, 3 sbn 13
8 11 sc, dec 12
Change the thread to black.
9-18 12 sc (10 rows) 12
Cut the thread, hide
We knit the sleeves with a yellow thread.
1 12 vp close in a ring, 12 sbn 12
2-6 12 sc (5 rows) 12
7 Connect the sleeve to the rest of the arm. 12 sbn capturing the front half loops already
tied hand.
12
8 (2 sbn, pr) * 4, ss, cut the thread and hide 16
With black thread in the first row of the yellow part of the sleeve we knit connecting posts, thread
cut, leave the tip for sewing.
Making a wire frame. Bend the wire on one side and, if necessary
wrap with adhesive plaster. We insert it and fill the handle with filler.
If it is more convenient for you to knit and stuff right away, then the frame must be made before knitting the handles.
It is more convenient for me to fill the part after inserting the frame. For this I use tweezers.
We sew the handles to the body.
To make the wire easier to enter the body, you can pierce it through with a knitting needle
torso in the place where the handles should be.
Second option.
This version of the handle is knitted with the formation of the elbow. We knit up to 16 rows in the same way as in the first
option. Starting from the 16th row, we knit according to the following description:
Right handle
16 4 psn, 8 sc for the rear half loops 12
17 4 psn, 1 sbn, 5 sbn for the front half loops of the 15th row, 2sbn 12
18 12 sbn 12
19 12 sb, 4 ps, change the thread to yellow 12
20 (1 sbn, pr) * 6 18
21 18 PRS for the rear half loops 18
22-23 18 sbn 18
24 (1 sbn, ub) * 6, fill with filler 12
25 6 kill 6
Pull the hole, hide the thread.
Attach the thread to the front half-loops of the 20th row, knit 18 sbn,
fasten the thread, hide the tip.
Left handle
16 2 sbn, 4 psn, 6 sbn for the rear half loops 12
17 2 sbn, 4 psn, 1 sbn, 5 sbn for the front half loops 15 row 12
18 12 sbn 12
19 12 sbn, 3 ps, change the thread to yellow 12
20 (1 sbn, pr) * 6 18
21 18 PRS for the rear half loops 18
22-23 18 sbn 18
24 (1 sbn, ub) * 6, fill with filler 12
25 6 kill 6
Pull the hole, hide the thread.
Attach the thread to the front half-loops of the 20 row, knit 18 sbn, fasten the thread, the tip
hide.
We attach the handles to the body.
Ears
You need to connect 4 parts. First we knit 2 pink details, then brown ones.
1 7 ch, starting from the second loop from the hook 6 sbn, ch, turn knitting 6
2 pr, 4 sbn, pr, run, turn 8
3 8 sbn, run, turn 8
4 pr, 6 sbn, pr, run, turn 10
5 pr, 8 sbn, pr, run, turn 12
6-8 12 sb, run, turn (3 rows) 12
9 kill, 8 sbn, kill, run, turn 10
10 10 sbn, run, turn 10
11 kill, 6 sbn, kill, run, turn 8
12 8 sbn, run, turn 8
13 kill, 4 sbn, kill, run, turn 6
14 6 sbn, run, turn 6
15 kill, 2 sbn, kill, run, turn 4
16 4 sbn, run, turn 4
17 2 kill, run, turn 2
18 kill 1
After the brown part has been tied, we do not cut the thread. We knit in a circle, connecting pink
and brown details. 18 sc on the side, 6 sc on the bottom, 18 sc on the side, ss.
A wire frame can be inserted into the eyelet if you want the eyelet to be able to
keep in shape. It is desirable to choose a thinner wire.
Bang. 3 parts of different sizes.
1 piece
1 Knit with beige thread in a circle. We dial 13 VP. We knit from the second loop from the hook 3 sb, 3
psn, 2 ssn, 3 psn, 3 sbn in 1 loop, 10 sbn, 2 sbn in the last loop, ss. Cut the thread
leaving the tip for sewing
2 Knit with brown thread. We start with the first dog of the previous row. 6 ss, 3 ss, (psn, ssn,
vp, ssn, psn) in one loop, 3 ss, 5 ss, cut the thread, hide.
2 detail
1 Knit with beige thread in a circle. We dial 12 VP. We knit from the second loop from the hook 3 sbn, 2
psn, 2 ssn, 2 psn, ss, 3 sbn in 1 loop, 9 sbn, 2 sbn in the last loop, ss. Cut the thread
leaving the tip for sewing
2 Knit with brown thread. We start with the second dog of the previous row. 4 ss, 3 ss, (psn, ssn,
vp, ssn, psn) in one loop, 3 sbn, 3 ss, cut the thread, hide.
3 detail
1 Knit with beige thread in a circle. We dial 11 VP. We knit from the second loop from the hook 2 sbn, 2
psn, 2 PRS, 2

psn, sbn, 3 sbn in 1 loop, 8 sbn, 2 sbn in the last loop, ss. Cut the thread
leaving the tip for sewing
2 Knit with brown thread. We start with the first PRS of the previous row. 4 ss, 2 ss, (psn, ssn,
vp, ssn, psn) in one loop, 2 sbn, 3 ss, cut the thread, hide.
A schematic representation of the first part is shown below.
Eyes
First we knit a brown piece. A speck. 1 piece.
1 We dial 4 VP. Starting from the second from the loop hook pr, 1 sbn, pr. 5
2-7 5 sb, 1 runway lift, turn 5
8 Now we tie on the sides and top. 1 VP lifting, along the side part 6 sbn; by
the upper part of the pr, 1 sbn, pr; along the side part 4 sbn, 1 psn, 1 ssn, 1 half-column with
2 yarns. Cut the thread, leave the tip for sewing.
Now we knit with a thinner thread. I have it iris. We need green, white and black
colors.
You can also use ready-made eyes, or make them out of felt. As you wish.
White color 2 pieces
1 6 sbn in KA 6
2 6 ex 12
3 (1 sbn, pr) * 4, 2 sbn, cut the thread, leave the tip for sewing.
Green color 2 parts
1 10 sbn in KA 10
Black color 2 pieces
1 6 sbn in KA 6
Now you need to connect all parts of the eyes together. First we sew the black piece to
green. Then green to white. It should be noted that we attach the green part to the white
not in the center, but on the side. Then, with a couple of stitches with white thread, we make a highlight on the eye.
You can also make a small outline around the white part with a brown thread.
Next, we sew on a speck. Then we sew on the eyes. I do not sew on the eyes, but I glue them.
We embroider the eyebrows. Sew on ears, bangs. We embroider the nose. For the nose, it is advisable to take yarn
thicker. This will make the nose more voluminous. We embroider a mouth. We embroider a drawing on a sweater.